Support

Pakistan / English

Menu
MT-SW1008PE
MT-SW1024D
Click to enlarge

MT-SW1016PE

16FE POE+ 2GE + 1G SFP Uplink POE Switch

  • 16 ports 10/100Mbps POE Ports
  • 2 Gigabit Uplink ports
  • 1 Gigabit SFP Uplink ports
  • 250W Total POE budget”

Description

The MT-SW1016PE series is a 18 Ports standard POE switch that provides 16 FE POE ports, 2 Gigabit Up-link ports and 1 SFP fiber port. Ports 1~16 features POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable. 2 Gigabit uplink ports ensure a smooth transmission for NVR or up-link routers. P116GH is a most economical solution for HD security network.

Categories: ,

Overview

The MT-SW1016PE series is a 18 Ports standard POE switch that provides 16 FE POE ports, 2 Gigabit Up-link ports and 1 SFP fiber port. Ports 1~16 features POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable. 2 Gigabit uplink ports ensure a smooth transmission for NVR or up-link routers. P116GH is a most economical solution for HD security network.

Features

• Supporting 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T；
• Supports POE IEEE 802.3af/at compliant Powered Device (PD).
• Modes: Normal switch mode/Extended mode(Port1-16:250Metres ultra-long transmission).
• Ports 1~16 features POE power supply capability and can be used as Power over Ethernet devices；2*10/100/1000Base-T Uplink and 1*1000Base-X SFP.
• Support full duplex based on IEEE802.3x and half duplex based on Backpressure.
• Auto MDI/MDIX crossover for all ports.
• Support non-blocking wire speed forwarding.
• MAC address auto-learning & auto-aging.
• Steel case, the total POE power budget of 200W.
• Just Plug and Play.

Dimension

Application

Model MT-SW1016PE MT-SW1024PE
Interface Characteristics
Interface 16*10/100Mbps POE ports(Data/Power) 2*10/100M uplink RJ45 ports (Data) 24*10/100Mbps POE ports（Data/Power) 2*10/100M uplink RJ45 ports (Data)
Basic function Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto- aging Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplexMAC address auto-learning & auto-aging
Standards IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control
Mode Normal switch mode/Extend mode
Data Transfer Rate Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)
Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)
Store & Forwarding Yes
Switching Capacity 9.2G
MAC Address Table Size 8K 16K
Jumbo Frame 2048 byte
Environment Operation Temperature：0℃～40℃
Storage Temperature：-40℃～70℃
Operation Humidity：10%～90% RH Non-condensing
Storage Humidity：5%～90% RH Non-condensing
Power Input POE Standards Single port maximum power 30W, Whole switch maximum power 320W Support over-current, over-voltage and short-circuit protection Support Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36-AC 110~240V 50/60HZ
Cabling type 100Base-TX: Cat 5e or better UTP/STP(≤100m)
10Base-TX: Cat 5e or better UTP/STP(≤250m)
Dimensions (L x W x H ) 280mm*180mm*43mm 440mm*180mm*43mm

Related products