Support

Pakistan / English

Menu
MT-SW116E
MT-SW1008
Click to enlarge

MT-SW1004PE

4 POE+2RJ45 100Mbps POE switch

  • 4 port 10/100 Mbps POE Ports
  • 2 10/100Mbps Uplink ports
  • 58W Total POE budget”

Description

The MT-SW1004PE series is a 100M standard POE switch that provides 6*10/100M adaptive RJ45 ports. Ports 1~4 features POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable. Supports two modes: normal switch mode/250M ultra-long transmission. MT-SW1004PE makes it easier for you to deploy wireless access point (AP) and IP terminal network devices using POE technology. Unmanaged model, plug and play, no configuration, easy to use.

Categories: ,

Overview

The MT-SW1004PE series is a 100M standard POE switch that provides 6*10/100M adaptive RJ45 ports. Ports 1~4 features POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable. Supports two modes: normal switch mode/250M ultra-long transmission. MT-SW1004PE makes it easier for you to deploy wireless access point (AP) and IP terminal network devices using POE technology. Unmanaged model, plug and play, no configuration, easy to use.

Features

• Supporting 802.3 Ethernet, 802.u Faster Ethernet.
• Supports POE IEEE 802.3af/at compliant Powered Device (PD).
• Modes: Normal switch mode/Extended mode (Port1-4:250Metres ultra-long
transmission).
• Ports 1~4 features POE power supply capability and can be used as Power over
Ethernet devices.
• Auto MDI/MDIX crossover for all ports.
• Support full duplex based on IEEE802.3x and half duplex based on Backpressure.
• Support non-blocking wire speed forwarding.
• MAC address auto-learning & auto-aging.
• Steel case the total POE power budget of 58W.
• Plug and play.

Application

Model MT-SW1004PE MT-SW1008PE
Interface Characteristics
Interface 4*10/100Mbps POE ports（Data/Power) 2*10/100M uplink RJ45 ports (Data) 8*10/100Mbps POE ports（Data/Power) 2*10/100M uplink RJ45 ports (Data)
Basic function Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802.3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto- aging Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802.3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging
Standards IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control
Mode 1Normal switch mode/Extend mode
Data Transfer Rate Etherent:10Mbps (Half-duplex);20Mbps (Full-duplex)
Fast Entherent:100Mbps (Half-duplex);200Mbps (Full-duplex)
Store & Forwarding Yes
Switching Capacity 1.2G
MAC Address Table Size 2K
Jumbo Frame 2048 byte
Environment Operation Temperature：0℃～40℃
Storage Temperature：-40℃～70℃
Operation Humidity：10%～90% RH Non-condensing
Storage Humidity：5%～90% RH Non-condensing
Power Input POE Standards Single port maximum power 30W, Whole switch maximum power 58W Support over-current, over-voltage and short-circuit Protection Support Soft Start of High-Power PD Support sequential boot-up Power Supply Pin:12+/36-AC 110~240V 50/60HZ Single port maximum power 30W, Whole switch maximum power 100W Support over-current, over-voltage and short-circuit Protection Support Soft Start of High-Power PD Support sequential boot-up Power Supply Pin:12+/36- AC 110~240V 50/60HZ
Cabling type 100Base-TX: Cat 5e or better UTP/STP(≤100m)
10Base-TX: Cat 5e or better UTP/STP(≤250m)
Dimensions (L x W x H) 124mm*115mm*33mm 190mm*140mm*43mm

Related products