Overview
Wire Map : It obtains the continuity for each one of the wires of the cable and the pin-out of the same ones. The result obtained is a pin-out graphic on the screen from pin-A to pin-B or error for each of the pins. It also shows those cases of crossing between two or more Hilo.
Pair-and-Length : Function that allows to calculate the length of a cable. It has TDR (Time Domain Reflectometer) technology that measures the distance of the cable and the distance to a possible error if there is one. In this way you can repair damaged cables already installed and without having to re-install a whole new cable. It works at the level of pairs.
Coax/Tel : To check telephone and coax cable sales Check the continuity of it.
setup : Configuration and calibration of the Network Cable Teste
Features
- Measure network cable length to an end or broken point.
- Check wiring error in STP UTP 5E, 6E, coaxial cable, such as open circuit, short circuit, jumper wire, reverse connection.
- Display by big LCD, with clear wiremap.
- Automatically time-delay shut off.
- Length Calibration: User can set self calibration factor by a given length cable (The length of calibrating cable needs to be more than 5M )
- Self-checking and automatically compensate any change in battery capacity or ambient temperature.
